You have to decide on your carpet, and now you have placed your order, and while we always suggest having a professional fitter to lay it for you, we understand that some people would instead fit it themselves.

In the moment’s blog post, we’re going to offer some tips and tricks for fitting your carpet and way that you can take to check the carpet yourselves.

Get Your Tools

Before you indeed contemplate starting to fit your carpet in Dubai, we suggest that you ensure sure you have all the essential tools.

A standard toolkit would include

Knee pads

Vid measure


Masking vid

Hammer or nail gun

19 mm & 10 mm nails

3 mm hardboard wastes

Pipe and string sensor


Hack saw

Carpet vid

Craft or Stanley cutter

Carpet stretcher

Carpet chuck


Vacuum cleaner

Measure Your Room

Hopefully, you’ll have formerly done this before placing your order, but we suggest taking the time to do it formerly again. To produce an accurate guideline for your carpet laying, we recommend grabbing a piece of Curtains in dubai.

On this distance of paper, draw a rough figure of your room, it doesn’t have to be accurate, and you want to make sure that the shape is adequately represented. Also, once you’ve measured each part of the room, add it to the illustration. This will provide you with an overview of the entire room and allow for easy computations to be made.

Don’t forget always to add 10 cm for any implicit waste.

When it comes to measuring any stairs, you’re carpeting; these can be slightly more complicated and bear a different process, Take the time to measure the depth and height of the stair before also multiplying the range. In this case, we suggest allowing a periphery of 10 for waste, as staircases are notoriously tricky.

Prepare The Bottom

  • Before you start to lay your new carpet, there are some pivotal medications that you need to take, and this includes removing any being carpet. Be sure in this step, as you don’t want to spawn any gratuitous damage or hurt yourself by being overworked. For this process, you must use your knee pads.

Fit Carpet Grips & Underlay

Carpet grips are nailed rods laid beneath the carpet to help it stick to the chosen area. These are veritably easy to use and can be measured to suit the place where they’re demanded. They should substantially be used around the room’s edges but not in the doorways.

Still, care should be taken to lay these rightly, and you should always be careful of any underlying pipes or lines.

As we’ve mentioned in other blog posts, we prompt you to ensure that you invest in a suitable underlay because it’s an integral part of the process. Underlay can help to smooth, cover and strengthen your carpet, allowing it to last for a little bit longer. This should be fitted precisely and cut using a Stanley cutter.

Fit The Carpet

First, lay your carpet approximately in the position where it’s to be installed and use one bottom to hold up one corner. You want to use the other bottom to smooth out the carpet gently. Immaculately, once it has been approximately laid, you want to have around 10 cm of redundancy at every edge.

Once this first step has been completed, you also want to cut down this excess using a sharp Stanley cutter vertically.

It’s also time to start laying the carpet, starting at the longest wall and working your way backward. Take a carpet chuck and use this to produce firm crinkle crowds in the carpet board and along the skirting boards. You also want to take a cutter and cut this area, around 5 mm advanced than the carpet face. Make sure that you hold the carpet when you cut this area.

Next, you want to take the carpet rope and place it about 25 mm from the skirting board, ensuring that its tusks are facing down. Using your knee, push the padded end down forcefully, as this will force the carpet to hook on the gripper at each corner.

Take the carpet chuck and use that to push down any redundant carpet, pressing it down between the skirting board and the bushing. This process should be repeated until the first wall is complete and along the conterminous borders before moving to the wall directly contrary.

Eventually, a door bar should be added to any door that enters the room.